<VV> stabilizer bar 65

[RI Corviar]

Ok, thanks.  Forgot I had the thing.  Got it 11 years ago, figured buy 
all the manuals for the car. 

Page 1965-3 indicates 1 with a circle in it indicates a revision.
Page 1965-4 indicates 1 with a circle in it indicates lubrication on all 
affected parts...

Which is right, or is it indicating that the statement is a revision?

Now on page 1965-33 part # 11 has a 5 next to it.  Does that mean that 
is the fifth revision, or is it a grade for the bolt?

Also I was considering a grease for the inside of the bushing, the same 
one I used on the outer bolt for the rear control arm.  To help in 
eventual dis-assembly.



J R Read_HML wrote:
> Chassis Manual - Figure 3-12.
> Later, JR
>
> ----- Original Message ----- From: "RI Corviar" <ricorvair at cox.net>
> To: <VirtualVairs at corvair.org>
> Sent: Tuesday, March 04, 2008 6:18 PM
> Subject: <VV> stabilizer bar 65
>
>
>> Stupid me.  I removed the front stabilizer bar without taking pictures.
>> Now a few months later I am putting it all together....it just doesn't
>> look right.
>>
>> Bolted in with the car on ramps the bar just about touches the front
>> suspension at the camber adjusting nuts.  If I hit a good bump I expect
>> it would hit it.
>>
>> Is it possible for it to be backwards?
>>
>> Here is a picture of it.
>>
>> http://members.cox.net/ricorvair/bar1.jpg
>>
>> The dip is between the bars.
>>
>> Thanks to all.
>>
>>
>>
>>
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all 
>> copyrights are the property
>> of the writer, please attribute properly. For help, 
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options: 
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________ 
>
>