<VV> Determining Diff Gear Ratios with the unit installed MANUAL trans only

[PatioMatt at aol.com]

Car on ground....   mark one tire.....  trans in 4th [ high  gear]   push car 
counting revs of Crank pulley until tire has made ONE  revolution.
 
3 = 3.08  3-1/4 =  3.27   3-1/2 =   3.55   3-3/4 - 3.89   4 =  4.11
 
Matt  Nall
Sea Mountain
Charleston, Ore.
_http://members.aol.com/patiomatt   
------------------------------------------------------------------------------
------------------------------------------------------
 
In a message dated 6/26/2008 4:51:26 P.M. Pacific Standard Time,  
moreheadscott at yahoo.com writes:

Hi  Folks,

I do not remember how to determine the gear ratio for the diff  by jacking 
the car up and counting the revolutions of the tire, does anyone  remember.  
It's still in the car and don't necessary want to remove it  and pop the lid.  
Thanks in  advance



_ 
(http://members.aol.com/patiomatt-------------------------------------------------------------------------------------------------------------------------
-----------In a message dated 6/26/2008 4:51:26 P.M. Pacific Standard Time, 
moreheadscott at yahoo.com writes:Hi Folks,I do not remember how to determine the 
gear ratio for the diff by jacking the car up and counting the revolutions of 
the tire, does anyone remember.  It's still in the car and don't necessary 
want to remove it and pop the lid.  Thanks in advance) 



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      (http://autos.aol.com/used?ncid=aolaut00050000000007)