<VV> Headlights

[iscdirector]

Perhaps the way the relays are wired they are sending that 12 volt power to both the high and low beam terminals on the headlamps when the high beams are turned on.
Dan Kidder
Daytona Beach FL

--- On Tue, 7/22/08, Ron <ronh at owt.com> wrote:

From: Ron <ronh at owt.com>
Subject: <VV> Headlights
To: virtualvairs at corvair.org
Date: Tuesday, July 22, 2008, 7:37 PM

I've been having problems with the headlights kicking off in a random
fashion when on high beam.  A light switch or two burned out (circuit breaker)
before I switched to relays but now the high beam breaker (an add on) kicked
off when on high beam last evening and when it went off, both sets of lights
went out.  So, my question is, where is the connection from the high beam
circuit to the low beam circuit?  Since there is this connection, why don't
the highs go on when the lows are energized since this connection must be after
the dimmer switch.?  How does this work?

RonH
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________