<VV> Headlights

[jimster1]

The dimmer switch selects between hi and lo beams.  The headlight switch
supplies power to the dimmer and has the circuit breaker.  It's kinda hard
to diagnose this any farther as we don't know how your relays are wired.
Jim, relay kind of guy....

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Ron
Sent: Tuesday, July 22, 2008 4:38 PM
To: virtualvairs at corvair.org
Subject: <VV> Headlights

I've been having problems with the headlights kicking off in a random
fashion when on high beam.  A light switch or two burned out (circuit
breaker) before I switched to relays but now the high beam breaker (an add
on) kicked off when on high beam last evening and when it went off, both
sets of lights went out.  So, my question is, where is the connection from
the high beam circuit to the low beam circuit?  Since there is this
connection, why don't the highs go on when the lows are energized since this
connection must be after the dimmer switch.?  How does this work?

RonH
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________