<VV> run on

[J R Read_HML]

If I recall the original post correctly, he only moved it from the street to 
the driveway.  So I doubt it is what you refer to as the "classic" run on 
situation.
Later, JR

----- Original Message ----- 
From: <Mikeamauro at aol.com>
To: <virtualvairs at corvair.org>
Sent: Monday, January 07, 2008 6:48 PM
Subject: Re: <VV> run on


>
>
>
> "...when I turn the ignition off the motor keeps on running. How can  I
> rectify this?..."
>
>
> I respond to this "Run On" complaint, thinking the poster was  complaining
> about a classic "Run On" condition... i.e.: the power to the  ignition 
> system is
> removed, but the engine keeps running due to a  "dieseling" situation. 
> I've
> watched the ensuing posts, and still haven't seen a  positive 
> identification of
> the underlying cause. Is the problem true  dieseling, or is power 
> continuing
> to be supplied to the coil after the key is  moved to the "OFF" position.
> Depending on the actual cause,  the pathway to solving the problem is 
> drastically
> different.
>
> Mike Mauro
>
>
>
>
>
> **************Start the year off right.  Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________