<VV> Manual tranny stats?

[BBRT]

Don't forget the trans cross member/ front mount is different between trans 
years. The later 66 and up is longer, I believe...

Chuck S
BBRT
----- Original Message ----- 
From: <JVHRoberts at aol.com>
To: <jwilson at unctv.org>; <virtualvairs at corvair.org>
Sent: Tuesday, February 12, 2008 4:55 PM
Subject: Re: <VV> Manual tranny stats?


>
> I would, in a HEARTBEAT!! I would use, however, a 64 or later 4 speed. You
> will need to change the input shaft, as the 64-65 4 speeds are different 
> than
> the 3 speeds, and different than the 61-63 4 speeds and different again on 
> the
> 66-69 4 speeds.
>
> As long as you have the right input shaft, they will bolt up. On the 66-69 
> 4
> speeds, there are two extra bolt holes you won't be able to use, but it'll
> still work.
>
> In a message dated 2/12/2008 1:42:33 P.M. Eastern Standard Time,
> jwilson at unctv.org writes:
>
> I'm  thinking of jerking the 3-speed out of my 65
> and replacing it with a  4-spd....
>
> What are the gear-ratio's per 'speed' of the
> 3-speed's vs  4?
>
> Will a post-65 4-speed work in a 65? I've heard
> there's some sort  of bolt-pattern discepencies.
>
> CJ  Wilson
> jwilson at unctv.org
>
>
>
>
>
>
>
> **************The year's hottest artists on the red carpet at the Grammy
> Awards. Go to AOL Music.
> (http://music.aol.com/grammys?NCID=aolcmp00300000002565)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________