<VV> Spyder voltage regulator angle bracket

[David Foster]

Dave,

The picture was someone else car.  Now that I know about this angle bracket 
I will be looking for one also!

Dave Foster

----- Original Message ----- 
From: "Dave Thompson" <dave.thompson at verizon.net>
To: "'David Foster'" <NeighborDave at roadrunner.com>; 
<virtualvairs at corvair.org>
Sent: Friday, August 29, 2008 3:19 AM
Subject: RE: <VV> Spyder voltage regulator angle bracket


> Dave,
>
> Thanks for the beautiful engine picture.
> If the picture is yours, you do have the bracket I'm talking about.
>
> I spoke with Jeff at California Corvairs today asking about the brackets. 
> He
> said that the 62 and 63 Spyder has a small triangular plate with three
> holes. The 64 spider has a fancier bracket that has legs to the firewall.
>
> I've gotten a vary reasonable offer of a 63 plate from a guy here on VV. I
> found what I was looking for.
>
>
> Thanks to all for your comments and suggestions.
>
> Dave Thompson
>
> -----Original Message-----
> I have a stock 63 Spyder that does not have the angle bracket.  Saw an 
> angle
>
> bracket on a 64 at the Homecoming last weekend.
> Would the angle bracket only be offered on 64 Spyder??
>
> Dave Foster
> 63 Spyder
> Westlake, OH
> ----- Original Message ----- 
> From: "Dave Thompson" <dave.thompson at verizon.net>
>
>
> [SNIP]
>
> I have noticed that the stock ones have a bracket that
> Tilts the voltage regulator to an angle to clear the air cleaner.
>
>