<VV> Spyder voltage regulator angle bracket

[David Foster]

I have a stock 63 Spyder that does not have the angle bracket.  Saw an angle 
bracket on a 64 at the Homecoming last weekend.
Would the angle bracket only be offered on 64 Spyder??

Dave Foster
63 Spyder
Westlake, OH
----- Original Message ----- 
From: "Dave Thompson" <dave.thompson at verizon.net>
To: <virtualvairs at corvair.org>
Sent: Thursday, August 28, 2008 3:15 AM
Subject: <VV> Spyder voltage regulator angle bracket


>I have a 63 spyder clone. The PO installed a piece of aluminum angle to the
> body voltage regulator bracket to move it over to clear the air cleaner. 
> It
> looks just OK. I have noticed that the stock ones have a bracket that 
> tilts
> the voltage regulator to an angle to clear the air cleaner. I have looked 
> in
> three major vender books and cannot find one listed, even used. Does 
> anyone
> have one they are willing to part with? Or, will someone trace theirs and
> send a full size outline to me so I can make a replica? A close up photo
> would also be nice so I can see the type of bolts used. Please write me 
> off
> line.
>
>
>
> OK, I know it is a clone; 63 body, 64 drive train, some 64 trim and my
> non-stock Doge Viper yellow paint job is just OK but I'd still like to 
> make
> it as stock looking as I can.
>
>
>
> Thanks in advance,
>
>
>
> Dave Thompson
>
> Dave.thompson at verizon.net
>
> Westminster, CA
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________