<VV> Wanted: 65-59 Front Spindles

[K. Michael Kost]

If it's for a `67 with the original front suspension you need to look for a `66-`69 since `65 is different. The brake anchor pin is a different diameter in `65 and the brake backing plates are not interchangeable. 

Mike Kost



----- Original Message ----
From: "Mikeamauro at aol.com" <Mikeamauro at aol.com>
To: virtualvairs at corvair.org
Sent: Monday, August 25, 2008 11:21:08 AM
Subject: <VV> Wanted: 65-59 Front Spindles

Mine are "bagged out"; wheel can be rocked top to bottom; no play side to  
side. Micrometer shows outer surfaces are egg shaped by 2K right side,  and 
almost 5K on driver's side. Probably not a huge performance issue, but would  like 
to fix none-the-less.

Prefer NOS or new, but would consider good, used (not worn where the  
bearings races set).

Thanks,
Mike Mauro, 67 Coupe