<VV> oil blowing out of dipstick

[Harry Yarnell]

JR's right, sever blowby. Ringjob.
As a 'temporary' fix (maybe), you can cut off the portion of the dipstick 
tube that is immersed in the oil (in the sump).

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "John Gull" <johngull at bellsouth.net>
To: <virtualvairs at corvair.org>
Sent: Monday, August 04, 2008 11:05 PM
Subject: <VV> oil blowing out of dipstick


> HI all.  out there in Corvair land.  I was getting some oil on top of the
> motor near oil filler tube/oil pressure sender. I have replaced sender 
> with
> a new one and also put more cardboard in the filler cap. Still getting 
> some
> oil in that area as well as the dipstick area. I have installed a hose on
> the dipstick tube and ran the hose into a bottle to collect the oil. I 
> have
> managed to accumulate a small amount of oil from dipstick mod. So what are
> the symptoms? More importantly what are the solutions? By the way, this is 
> a
> 140/4speed! Many thanks to all! Let me know @ johngull at bellsouth.net 
> John
>
>
>
>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>