<VV> Stabilizer Bars Retrofit? - Advice

[Sethracer at aol.com]

In a message dated 9/12/2007 7:27:48 PM Pacific Daylight Time,  
corvairduval at cox.net writes:

To add  sway bars to a 63, you would need the lower control arms from a 
64 or from  a 62,63 with optional sway bar. One could weld the little 
brackets onto  the control arm, but you still need the 64 arm to cut the 
brackets off, so  just change the arms. Two holes need to be drilled in 
the front frame  rails, I think. Just use the measurements from a 64 car 
as a  guide.

Frank DuVal




Or swap in a 64 front suspension complete. <grin>  -Seth



************************************** See what's new at http://www.aol.com