<VV> LM door glass repair?

[Harry Yarnell]

Corvair door glass issues, especially late models, suffer from failure of 
the spot welds on the two brackets attached to the bottom glass tray. These 
brackets attach the lift pantograph to the steel channel that holds the 
glass.
They can be re-welded with a wire welder, in place, but be carefull you 
don't overheat the channel, and melt the glass bonding agent. Tacking is 
suficiant.
Have done this many times...

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "tconnolly" <tconnolly at iepfire.com>
To: <virtualvairs at corvair.org>
Sent: Sunday, October 07, 2007 9:36 AM
Subject: <VV> LM door glass repair?


Hi all,
The passanger windo on my 69 vert is one crank away from falling into the 
bottom of the door.  It has needed help rolling up for the past two years I 
have owned it.  I have read the tech guide cover to cover this morning but 
can't find any repair guides on this fix which supprised me since it seems 
like something that would typically happen to 30-40 year old cars.
Thanks,

Tom Connolly
Industrial Energy Products, Inc.
1200 Corporate Blvd.
Lancaster, PA 17601
Ph 717-285-4437fax 717-285-7259
www.iepfire.com
www.iepindustrial.com

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________