<VV> Throttle Return Spring

[J R Read_HML]

I meant to say top "cover", not top "shroud".  Sorry if that was confusing.
Later, JR

----- Original Message ----- 
From: "J R Read_HML" <hmlinc at sbcglobal.net>
To: "Keith Onchuck" <keitho64 at yahoo.com>; <VirtualVairs at corvair.org>
Sent: Tuesday, October 02, 2007 2:34 PM
Subject: Re: <VV> Throttle Return Spring


> The return springs are pretty meek - intentionally.
>
> Are you sure the linkage is not catching on a plug wire or a vacuum line? 
> Also, is the fan bearing beginning to "walk out" of the top shroud and 
> preventing the throttle cross shaft from fully closing?
>
> Seems to me that an extra (or a stiffer) spring could lead to excessive 
> wear.
>
> Later, JR
> CCE CORVANANTICS CORSA member
> '61 Rampside Standard 4/110
> '65 Monza Convertible 4/140
> '66 beater 500 Coupe "icemobile" 4/140 (50%)
>
>
> ----- Original Message ----- 
> From: "Keith Onchuck" <keitho64 at yahoo.com>
> To: <VirtualVairs at corvair.org>
> Sent: Tuesday, October 02, 2007 1:11 PM
> Subject: <VV> Throttle Return Spring - 140 motor
>
>
>>
>> My idle is hanging up and I know I have a very weak
>> return spring
>
>>
>> Thanks
>>
>> Keith
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________