<VV> 110 HP/95 HP differences for 1968-1969

[J R Read_HML]

>From '64 on, I count at least 10 different casting #s for 110 heads and 7 
for 95 heads.  What casting # is on your heads?  Look at both as there is no 
guarantee they are original to the engine and who knows what changes may 
have been made by a PO.

One source for the casting #s is the "Corvair Junkyard Primer".  I'm sure 
there are others.

Later, JR

----- Original Message ----- 
From: "shortle" <shortle556 at earthlink.net>
To: <virtualvairs at corvair.org>
Sent: Sunday, November 25, 2007 12:13 PM
Subject: <VV> 110 HP/95 HP differences for 1968-1969


> Folks,
> I am still uncertain on the differences at the end of production and 
> apologize if I am "beating a dead horse" but I am not satisfied with the 
> present answers/opinions. Is the only difference in 68-69 AIR in the 
> pistons? My understanding is the 95HP had flat pistons and the 110HP had 
> the "domed" pistons.The cylinder heads were identical. Is this correct?
> Again, I thank you all.
> Timothy Shortle in Durango,Colorado
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________