<VV> 95HP heads

[Sethracer at aol.com]

In a message dated 11/13/2007 2:05:04 P.M. Pacific Standard Time,  
hyarnell1 at earthlink.net writes:

...and  to muddy the waters even further, late heads have a different bore 
for the  cylinder. I have some specs somwhere (of course I can't find them) 
that  early heads won't fit late jugs, and late heads are 'loose' on early 
jugs;  or the other way around...

harry yarnell



Except that the "early" pistons he was referring to were the flat-top 1965  
and most 66. Those and the late open-chamber head would be about 7 to 1  
compression. If you used 1963 displacement, with (appropriately shimmed) later  open 
chamber heads - you would be even lower.  A bonus, though, you could  
probably start the car with a coiled rope! <grin> -  Seth



************************************** See what's new at http://www.aol.com