<VV> IECO manifols for LM 110

[Tony Underwood]

At 02:38 PM 5/28/2007, Rodney Sampson wrote:
>All:
>  Recently obtained an IECO 4bbl manifold for my LM 110 engine.
>   It's the one where the tube bolt to the casting and the casting 
> has passage for
>      some circulating warm liquid.
>   My issue is, when the manifold is bolted together it's about 1/4" 
> too far between the bolt holes( i.e. I have to
>       bend the carb studs out for tis to fit).
>    Question, is this truly for the LM engine ?
>    My head castings indicate that it's a 66.
>




You MUST use the std GM/Rochester carb spacers on the tubes where 
they attach to the carb mount/plenum.   Otherwise, the intake won't 
fit.    The spacers are available from vendors.


tony..