<VV> folded fin oil cooler on 140?

[J R Read_HML]

So which top shroud do you have?
Later, JR

----- Original Message ----- 
From: "Ray Rodriguez" <reray at echoes.net>
To: <virtualvairs at corvair.org>
Sent: Wednesday, May 23, 2007 1:14 PM
Subject: <VV> folded fin oil cooler on 140?


The message below lead me to believe there might be a problem swapping the 
folded fin oil cooler onto my 140... is that the case? I was previously 
under the impression I could bolt the folded fin cooler on without any 
problems for more effective cooling.  Please let me know as I have already 
purchased the folded fin cooler and will be installing it in a week or two.

Thanks!

Ray Rodriguez III


Tony,
If the top shroud is off a smogger engine, it will use the same 12 plate oil
cooler as the 140... but if it's a non-smog 110/95 it will use the 8 plate,
which will easily accept a folded fin style oil cooler...
Hope this helps!
Later,
Lonzo
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/815 - Release Date: 5/22/2007 
3:49 PM