<VV> Top Shroud.- Cooler area

[Sethracer at aol.com]

In a message dated 5/20/2007 5:38:28 PM Pacific Daylight Time,  
rusecular at yahoo.com writes:

Hi:

Other than the "cut" for the secondary carbs, is  there a difference 
between the "top shroud" of a 140 and a  110?

Does anyone in the Charlotte area have a working used (or  new) vacuum 
advance unit for sale? The car is a 66 - 110 - 4speed  !

Regards,


Tony I.  





They are made from the same stamping. The only difference is the two  extra 
cut-outs for the carbs.  The oil cooler shroud area is actually  shorter for a 
12 plate cooler - NOT LONGER. The round points on the 110 shroud  are just 
chopped off to allow the much bigger separate cooler cover to mate with  the 
cut-off shroud. You will need a 12 plate cooler cover, but it is easy to mod  the 
"8-plate" 110 shroud to fit the 12 plate cooler and the 140  heads. You can 
measue the amount to cut by checking an existing 140/180  shroud. - Seth Emerson 
 
 



************************************** See what's free at http://www.aol.com.