<VV> Early Coupe window regulator removal

[Shaun McGarvey]

Every time I've done it, it's been a Beeotch. Lots of pulling, prying and 
swearing. No easy way.

yea, Vairily ... Shaun

----- Original Message ----- 
From: "Doug Mackintosh" <dougmackintosh at yahoo.com>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Sunday, May 20, 2007 2:17 PM
Subject: <VV> Early Coupe window regulator removal


> Early gurus - help!
>
>  My window regulators are binding (1962 Coupe). Today I  tried removing 
> the drivers regulator, following the 1961 manual instructions (page 
> 10-53). But I couldn't do it! I was never able to work the regulator past 
> the ventilator division channel. I did not remove the division channel 
> stud (I only removed the nut and loosened the division channel retaining 
> screw near the window sill). Was I supposed to remove the stud, then slide 
> the regulator down past the end of the division channel? If so, how do I 
> remove the stud? If not, how do I get the regulator out?
>
>  If anyone has done this, I appreciate any help you can offer.
>
>  Thanks!
>
>
> -- Doug Mackintosh
>  Corsa member since 1996
>  Corsa/NC member since 1996,  Virtual Vairs member
>  Corvair owner 1969-1971 and 1996-on
>
> ---------------------------------
> Yahoo! Answers - Got a question? Someone out there knows the answer. Tryit 
> now.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________