<VV> 61 Rampie wheel bearing update

[James Davis]

Front FC hub is PN 3812712; front car hub 65-69 car is PN 3887867. So 
I would say the hubs are different.
Jim Davis




At 10:11 AM 5/12/2007, Rex Chivers wrote:
>Ok got up this morning and pulled the wheel back apart.  Bearings 
>and all looked fine.  Removed the inner bearing outer race and you 
>could see signs where the race had started to spin in the 
>housing.  Cleaned up the race and the hub and wiped down with 
>solvent to remove any grease residual. Reinstalled race using 
>loctite red stud and bearing mount.  BTW the spindle sizes are 1.249 
>for the inner bearing and .749  for the outer bearing.
>
>In the event that the loctite fix does not work, are the hubs on the 
>FC the same as the hubs on a LM ?  I know that the bearings are the 
>same but am unsure about the rest.
>
>Thanks for the help
>  -Rex-
>65 vert
>61 Rampie