<VV> Re: FUEL PUMP PUSHROD

[Bill Hubbell]

Just a technicality - it is called the Rear Housing, not the "timing cover".


Bill Hubbell

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of N2VZD at aol.com
Sent: Tuesday, May 08, 2007 1:32 PM
To: virtualvairs at corvair.org
Subject: <VV> Re: FUEL PUMP PUSHROD

any worn pushrods i have seen have gotten mushroomed over on the cam end
and 
cant be removed from the top.    so if you cant pull it out  get ready to 
pull the timing cover.  just ran across it on an engine i  parted out.  i
had to 
grind the end to get it out.  cam seems to have  survived.  in this case i 
found the new fuel pump was left loose amoung  other problems (such as not
one 
drop of oil in it).  at least the heads i  wanted are ok.
regards , tim colson



************************************** See what's free at
http://www.aol.com.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________