<VV> Re: dispensing gear lube etc
N2VZD at aol.com
N2VZD at aol.com
Sun May 6 04:10:23 EDT 2007
a neat pump for this type of lube can be found at marine suppliers
cheap(around $6). its plastic and fits on gallon jugs. i have 2 , one on synthetic
gear lube , another on a mix of i can stp with 90 w texaco .i also have a
bottle that lucas gas stabilizer came in for pouring 90 into gear boxes on
snowblowers etc that would work well on steering gears. it has a small spout with
a cap on a quart bottle.
i would rather fix the problem with a steering gear than mask it with
grease . make sure the shaft bushing is tight enough to accept a (new seal) not
all that hard to do. at least check it for play etc (pitting from rust ...move
the seal or bush the shaft) ultimate is a rebuilt box from our fine vendors
, then you know its right.
regards, tim colson
************************************** See what's free at http://www.aol.com.
More information about the VirtualVairs
mailing list