<VV> Chasing a stumble

[TimogensTurbo at aol.com]

In a message dated 3/7/2007 9:32:34 AM Pacific Standard Time, 
devin at valleyautomotivesupply.com writes:

> Trying to eliminate this I have rebuilt the distributor, as the timing was
> bouncing around 6-8 degrees.  Point plate moves smoothly.  Installed a new
> bushing, new points, condensor, cap and rotor.  Timing is set at 15 degrees
> initial and 36 total with a dial back timing light.
> 
=======================================================

You did replace the points plate?  or at least add the Ground wire 
recommended by many?

Have you run it with the VA  disconnected?

Matt Nall...west coast
http://members.aol.com/patiomatt
lots of info!


**************************************
 AOL now offers free email 
to everyone.  Find out more about what's free from AOL at http://www.aol.com.