<VV> More #%^&*@ air compressor (NO CORVAIR)

[Ron]

300 is a bit high for a flexible hose, what's it rated at?  It should be 
printed on the hose.  If not, don't touch it!

RonH

----- Original Message ----- 
From: "Stephen Upham" <contactsmu at sbcglobal.net>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Tuesday, June 19, 2007 1:04 PM
Subject: <VV> More #%^&*@ air compressor (NO CORVAIR)


> Is it safe to run a ten foot, 3/8 inch rubber pressure hose (brass 
> connections on both ends, rated to 300 psi) between the shut off  valve 
> and the air pressure regulator, or does this need to be solid  pipe up to 
> the regulator/ filter combination?  The tank's relief shut  off switch 
> kicks in at 155 psi.
>
> P.S. How much larger than the air tool hose does this tank to  regulator 
> connection need to be?
>
> Stephen U
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>