<VV> Power Top success
Jim Bannister
jimster1 at earthlink.net
Fri Jun 8 15:36:04 EDT 2007
Aren't we picking the relay with the switch and not powering the motor via
the switch? Remember the motor gets 12V. thru the breaker all the time. It
runs when it gets a ground.
Jim
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Michael Kovacs
Sent: Friday, June 08, 2007 12:32 PM
To: Matt Nall; VV
Subject: Re: <VV> Power Top success
That might work, but the 30A circuit breaker is in the back of the LM close
to the top MOTOR. If the power to run the top was (fused) at the switch up
front, it would have to run 30A from the back to the front and then to the
back again.
The power to the top switch is from the front wiring harness and does not
need 30A. The switch is still a food idea but I would still run the power
for the motor directly from the battery thru a 30A CB.
Matt Nall <nalllm at verizon.net> wrote:
Doesn't need to be stock..... wht not a 30 amp Double pole / double throw
toggle switch?
_______________________________________
More information about the VirtualVairs
mailing list