<VV> Radio (won't fit)

[Tony Underwood]

At 04:18 PM 7/17/2007, David McMillan wrote:
>Hey guys, speaking of stock radios. I can't seem to find one that 
>fits my '64 Monza. The PO had put a Realistic AM/FM casette in with 
>some other pieces to help make it stay. I want to get a stock radio 
>in then hide a more updated one in the glove box as Padgett describes.
>I tried putting in my '63 AM (from my group red Spyder), but the 
>right dial knob has a raised ring around it that prevents pushing 
>the unit flush against the dash. I also received a donor '64 radio 
>that has the same problem. Are they all like this? The holes in the 
>dash for the volume and dial knobs are pretty much the same size, 
>about 1/4 inch (maybe a bit bigger).
>
>Any clues?
>Dave



You have an early series radio housing... pre-'62 which mounts a 
short chassis tube type radio.  The PO likely chased down such a 
housing because it's more user-friendly for aftermarket radios since 
both of the control shaft holes are the same size.


I bet if you ask nice, somebody in here would hook you up with a 
'63-64 radio housing for pocket change.   It's identified by one 
shaft hole being small, the other is very large to accommodate a 
shaft mounting cup.   Don't forget to check around for that cup too...  ;)


tony..