<VV> Late carbs--early engine?

[Frank DuVal]

The casting might be different for the choke pulloff mounting area, but 
the belcranks will probably fit OK. And you don't need the choke pulloff 
with the manual setup. One could make Frankenstein carbs by swaping air 
horns....

Grant, any ideas here?

Frank DuVal

James Davis wrote:

> The castings are different on the air horn and carb body for the 
> manual vs auto choke carbs.
> Jim Davis
>
>
>  At 04:50 PM 7/6/2007, J R Read_HML wrote:
>
>> So, why can't he just hook up them up for manual operation?
>> Later, JR
>>
>> ----- Original Message ----- From: "D. Barry Ellison" 
>> <bars84crx at hotmail.com>
>> To: <VirtualVairs at corvair.org>
>> Sent: Friday, July 06, 2007 2:07 PM
>> Subject: RE: <VV> Late carbs--early engine?
>>
>>
>>> Didn't 61's have manual chokes?  Are they later heads?  If they're 
>>> not later heads, you'll lose the chokes w/o drilling holes and 
>>> tapping at the bottom to install the choke coils.
>>>
>>> Barry in SC
>>> 2 lates, 2 earlies
>>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>