<VV> oil pressure problems?
Frank DuVal
corvairduval at cox.net
Mon Jul 2 09:11:37 EDT 2007
Yes, try another one. Water can enter the switch and rust the mechanism.
Frank DuVal
Kinzelman, Andy wrote:
> Guys,
> This regards my daily driver 63 Monza.
> A while back I made a rookie mistake - driving a substantial distance with the oil cap off. Of course, the entire engine compartment was covered with oil.
> Saturday I got around to trying to clean it up. I spritzed degreaser onto the engine and compartment (engine at ambient temperature) & rinsed it down repeatedly with a hose sprayer (not a power washer). Surprisingly, the car started right up without having to dry anything out.
> However, I am now getting an oil pressure indication (light) - that occurs shortly after startup. The oil level is OK, and if I pull the sender wire the light goes out.
> Could I have damaged the sender?
> Thanks,
> Andy K.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
>
More information about the VirtualVairs
mailing list