<VV> shift tube

[John Beck]

No need to use the screws.  A dab of JB Weld will hold the brass
bushings in place.  I'm sure the delrin ones are also great.  --J.B.

mhicks130 at cox.net wrote:
> 
>  > *********************************************
> completely dissagree! I used clarks brass bushing and hated it, you have to use
> set screws through your tube and i always had binding problems and it caused a
> vibration in my shifter. I've never used plastic ones but the delrin ones from
> corvair underground are great, self=lubricating, press fit, easy install and i
> recomend front and "rear". I would also use CU's polygraghite stabelizer
> bushing. I have rebuilt dozens of shift tubes with these and never had a problem
> and gives a solid shifter feeling.