<VV> front directional signals - help!

[TimogensTurbo at aol.com]

In a message dated 4/22/2007 11:06:15 AM Pacific Daylight Time, 
rbkj84 at comcast.net writes:

> I recently changed the canceling cam mechanism in my 65 Corsa.  I realized 
> that the rear directional signals work fine but the fronts do not work at 
> all.  The front dimmer lights work and the front bulbs are good - no broken 
> filaments.  Its not the flasher unit because I pulled one from my Spyder and it 
> did not fix the problem in the Corsa.  Spyder front directional signals are 
> okay.  Can anyone tell me where to look for the problem? 
========================================================

Welcome to VV!  Man...you need a wiring diagram!......no matter how good at 
electrical you may be...until you "know" the car....invaluable!

Tell us / me   what you mean by "dimmer lights"   "Spyder" front 
directionals...???

You should have amber fluted lenses under each side of the bumper...in the 
body..

These each have 1 [one] 1157 bulb with 2 filaments.

The TALL  filament is the "parking lights" [dim] and only work at the 1st 
pull notch of the headlight switch

The turn  signal is the SHORT filament...[ Bright] and is the one you are 
concerned with...

Most usually...the turn signal SWITCH is suffering from bad alignment of the 
contacts...or corrosion..


Matt Nall...west coast
http://members.aol.com/patiomatt
lots of info!


**************************************
 See what's free at 
http://www.aol.com.