<VV> 64 Engine problems solved...for now??

[TimogensTurbo at aol.com]

In a message dated 4/20/07 4:08:35 PM Pacific Daylight Time, 
bars84crx at hotmail.com writes:


> The main problem was the air mixture screw.  
=========================================
Aren't we talking about Rochester HV's??  If so....you need to buy a book!  
and quit listening to those around you....GGGG

No such thing.......or do you have Solex 34picts'??? [ 68 Volkswagen ]

The screw at an angle that is threaded INTO the carb, is FUEL!!  Start at 2-3 
turns out.

You do NOT balance  with Fuel!!   ONLY AIR!!!   The Screws  that are in the 
linkage on the carbs... they open and close the throttle plate...

You did have the linkage at the drivers side carb  removed from the crosshaft 
while Balancing?

Matt Nall



**************************************
 See what's free at http://www.aol.com.