<VV> compression test
Secular
rusecular at yahoo.com
Thu Apr 19 17:45:32 EDT 2007
http://www.aa1car.com/library/compression.htm
Tony I.
----- Original Message -----
From: "Richard Widman" <richard at widman.biz>
To: <virtualvairs at corvair.org>
Sent: Thursday, April 19, 2007 5:32 PM
Subject: <VV> compression test
> Agree on hot or at least warm, and the carbs. The engine should be turned
> over at least 6 times to get a full reading. Then compare cylinders.
> But... Then, if any are low, add a squirt of a teaspoon or so of oil into
> the cylinder to see whether it is the rings or the valves that are causing
> the lower reading (harder to see on a horizontal engine). If the reading
> goes up, problem is rings, stays the same, its valves.
>
>
>
> The snapon site has the whole procedure.
>
>
>
> ------------------------
>
> Richard Widman
>
> <http://www.widman.biz> www.widman.biz
>
More information about the VirtualVairs
mailing list