<VV> Judson supercharger questions

[Eric S. Eberhard]

I am curious of a few things.  The original carb is a 2 bl 
Holley/Stromberg.  It is 300cfm.  I was trying to find a progressive 
Weber to replace it (that old bugspray carb is kind of a pain) but 
could only find them up to 265cfm or so.  Did you find one bigger?  I 
have also looked at a Holley 4bl that is 350cfm which may be more 
appropriate.  I would also have to build an adapter or find one.  Has 
anyone else tried a different carb on the Judson?  Which?  Does the 
4bl sound like a good idea?

At 05:15 PM 9/28/2006, gangelli at adelphia.net wrote:
>hello all .I have decided to go in a different direction with the 
>powerplant for my sprint wagon and I have a judson supercharger kit 
>for sale . It is almost complete ,one oil line needs to be made and 
>I think one idler pulley found to replace a missing one. I have 
>modified the carb base to take a weber progressive 2 barrel I have a 
>32/36 dgev I was going to use. It is epoxied on so it can be removed 
>to allow the original stromberg carb to be used.I did match port the 
>intake on the supercharger . It is lightly used I have not run it 
>but took it apart and the vanes and center slots are in very good 
>shape showing no wear.comes with the marvel oiler but does  not 
>include  the carb. you will have to fabricate a linkage depending on 
>what carb you run the original judson cross link is included which 
>was to be used with the stock stromberg ww 1bbl carb .If no serious 
>interest here it will be posted on ebay.I will try to have pictures 
>to see but do not right now. this is for the early 145 engines auto 
>or manual .I am asking 950.00$ thank you  I also have for sale my 
>custom 62 greenbrier hot rod style tweed interior in gray and purple 
>,yellow truck with purple flames far too much custom stuff to list 
>,fully pwder coated shrouds,front and rear performance suspension 
>etc..  15 inch wheels. I must sell cost over 20,000$ to build 10 yrs 
>ago .110 4spd car engine.  not perfect but very nice  will answer 
>questions will try to post photos . it needs minor things finished 
>door seals,fuzzies,some final electrical hook ups for stereo and 
>dash . asking 7500.00 or best offer . regards jeff angelli buffalo NY
>  _______________________________________________
>This message was sent by the VirtualVairs mailing list, all 
>copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________


This email sent by:

Eric S. Eberhard
(928) 567-3727          Voice
(928) 567-6122          Fax

928-301-7537 -- you may call any time day or night, I turn it off 
when I sleep :-)  Please try to use a land line first (reception often poor).

Note the change in the domain from vicspdi.com to vicsmba.com !!!!

For Metropolis support and VICS MBA Support!!!!

http://www.vicsmba.com

Completely updated web site of personal pictures with many new 
pictures!  Includes horses, dogs, Corvairs, and more.

http://www.vicsmba.com/ourpics/index.html

Corvair pictures including the Judson setup on our 62 Sedan and lots 
of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible.

http://www.vicsmba.com/ourpics/corvairs.html

My younger brother Martin has started a very serious car company.  A 
hot rod (very fast) electric roadster is the first offering.  The 
chassis is built by Lotus to their specs.  Check it 
out:  http://www.teslamotors.com