<VV> batteries discharging - starter cable shorting ? - heaterhoses?

[airvair]

Unfortunately, yes. It takes a bit more time to saw thru an early model
shaft, as it's just a solid rod. In other words, it was (unnecessarily)
a lot heavier than it needed to be to do it's intended job.

-Mark

Frank DuVal wrote:
> 
> Must be a Late model thing....
> 
> Frank DuVal
> 
> airvair wrote:
> 
> >I've seen that happen. And if you ever see a half shaft cut in two,
> >you'll be amazed as to just how thin the wall of that tube really is.
> >
> >-Mark
> >
> >Charles Lee at Proper Pro Per wrote:
> >
> >
> >>JR,
> >>
> >>Right !  Those heater hoses come loose and do all sorts of damage !
> >>
> >>I once had a heater hose hanging loosely over the half-shaft, and it
> >>actually sawed (!) through the shaft and caused the wheel to collapse ! That
> >>was a shocker !!!
> >>
> >>The heater hose just rubbed right through the spinning axle !  Yikes !
> >>
> >>Chaz