<VV> Re: EM seat belt installation

[J R Read_HML]

My recollection is ... mandated for front starting in '65 and both front and 
rear starting in '66.  However, they WERE offered as an option some time 
prior to that.... SO the dimples would likely be there for (most likely 
dealer install) on those cars where the option was ordered

Later, JR


Past, present and future posts to Virtual Vairs by this writer are for the
private use of Virtual Vair members only.  Reproduction, including
archiving, outside of the Virtual Vairs is specifically prohibited.  This
prohibition includes any portions of this writer's message which may
have been included in a response message by another VV member.----- Original 
Message ----- 
From: "Rudy Korb" <rudyandbrenda at sbcglobal.net>
To: <VirtualVairs at corvair.org>
Sent: Thursday, September 07, 2006 5:40 PM
Subject: <VV> Re: EM seat belt installation


> If I remember correctly, seat belts were mandated starting with the 68 
> model cars.  Since yours is 4 years earlier, there may be no specific 
> place for them.  I would imagine that you could drill the necessary holes 
> and use some 1/4" steel under the floor as a backer.
>
>  Rudy
>  67 Monza Conv.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.1/440 - Release Date: 9/6/2006
>
>