<VV> valve adjusting
BobHelt at aol.com
BobHelt at aol.com
Mon Sep 4 01:21:43 EDT 2006
In a message dated 9/3/2006 6:41:05 PM US Mountain Standard Time,
slowboat at mindspring.com writes:
Mike, the best way to sense 0 lash is when you cannot rotate the pushrod
anymore between your fingers. It's almost impossible to get to this point by
trying to move the pushrod up and down.
Andy Clark
Andy,
I think you'll find that this will cause several collapsed lifters if you
use the twist method. Actually the in-out method works best if you use the
rocker movement as your guide. Another method id to slip a 1 or 2 thou feeler
gauge in ther to check clearance.
Regards,
Bob Helt
More information about the VirtualVairs
mailing list