<VV> VV Cold draft above kick panels

[Devin]

John-  Visit your local automotive paint supplier.  There are several
products that may work, the most common of which is generally referred to as
dumb-dumb.

Devin
----- Original Message -----
From: "john" <jncmiller at mchsi.com>
To: <virtualvairs at corvair.org>
Sent: Thursday, October 26, 2006 4:36 AM
Subject: <VV> VV Cold draft above kick panels


I have discovered a very cold draft running down the road rising out of the
upper portion of the kick panels on a late model I have been driving to
work. Upon removing the panels I found none of the usual white sticky putty
that is normally around the vent. I am not sure if this stuff is still
available and the parts store guy just gives me the "deer in the headlights"
look (probably thinking...the wierd corvair guy looking for something no
body else ever needs....)
  I have used plastic modeling clay (yeah...raiding the kids toybox, again)
before in a pinch but was wondering if there is a reasonable substitute
anywhere to be found. This is last dumb question I will ask this
week.....promise!

John Miller
Iowa
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________