<VV> Re:PG CONVERSION WIRING

[N2VZD at aol.com]

if you can find a junk pg dash you can just take the short lead that goes 
from the ignition switch to the pg safety switch and add it. otherwise it is not 
hard to make one using connectors purchased at your auto parts store.pull the 
one purple wire from the switch connector , put it to the safety switch ,then 
add a new short lead to the other terminal of the safety switch to the 
terminal on the ignition switch. if you look at the wiring diagram i think you will 
see how simple it is to do.  i have done it to several vehicles now, including 
using spyder dashes.  next i plan to add backup lights that look ok.
http://corvair.de/n2vzd/
regards, tim colson