<VV> Mid-engine Corvairs

[Bryan Blackwell]

3a.  How about also modifying the trans to diff interface so *only* the 
diff is turned upside down?

--Bryan

On Nov 1, 2006, at 5:41 PM, Clark Hartzel wrote:

>  3. Flip the entire transaxle upside down by cutting the bellhousing
> in half in a lathe and rewelding it back 180 degrees off.  Works fine 
> on a
> stick shift except the shifter is now at the top instead of the bottom 
> and
> your starter is dragging on the ground!  Powerglides end up with the 
> oil pan
> on the top!