<VV> Norm's "SEQ" (Coil wiring)

[Andy Clark]

Ed, that's a black/purple stripe ('65) or a purple ('66-69), not pink. FYI,
it also has 12V on it during cranking.

Andy Clark
1966 140/4 Monza Sedan
1966 140/4 Yenko Clone
1966 180/4 Cord 8/10 #60

----- Original Message ----- 
From: "Ed Dowds"
Sent: Tuesday, May 30, 2006 3:15 PM
Subject: Re: <VV> Norm's "SEQ" (Coil wiring)


> All this talk about ign wiring should include the standard "look in the
> book"! In this case it would be a wiring diagram.
> The "running" power for the coil comes from the front of the car via a
> black/pink wire (65) or a pink wire (66-69). It goes from the front of the
> car to the BODY side of the engine compartment 12 pin connector. That
> connector is near the bottom mount of the engine compartment prop.
> This is where one would get 12 volts if they wanted it for their
Pertronics
> or to switch a relay for 12 volts to an HEI conversion.
> snip................................
>
>                            Ed