<VV> Norm's "SEQ"

[Frank DuVal]

Uh Tom, the yellow wire on the starter terminal is the same one that 
connects to the coil + terminal.
Ray, this is probably the wire disconnected on your coil.
This wire only supplies +12volts when the starter is cranking. At other 
times when the key is on it will only read coil voltage.

Having this wire disconnected will still have the car start and run, 
just not as easy to start in bad conditions (very hot, very cold).

So safeguard will not work on this wire properly.

But a relay switched by this wire may do well. Or follow others 
instructions so far on color of wires.

Frank DuVal

tom zimmermann wrote:

>Norm,aside from running a manually-switched dedicated 12v circuit,you *could*trace the 12v ign (yellow) wire back from the 2-wire plug to starter to the main harness connecter ,by the prop for rear decklid...go to the body-side of that plug,and there you have start/run 12...you could tap off there,and employ a relay to switch more amps than the yellow wire can supply,like to your safeguard,etc...Tom..//
>
>
>  
>