<VV> Highrise air cleaner
AeroNed at aol.com
AeroNed at aol.com
Thu May 4 00:47:59 EDT 2006
In a message dated 5/3/2006 5:19:36 P.M. Central Daylight Time, ronh at owt.com
writes:
Nice in concept except for the fact that it takes at least ten diameters of
straight pipe downstream stream of an elbow to even out the flow. There may
be some other things influencing it in this case.
That would require the engine lid to be somewhat modified. The reason it
works is because it is an improvement. The turbulence of the air increases as it
passes through the air cleaner system. The edges of the stamped sheet metal,
the element and all of the required turns make things worse. By adding 2
inches of straight pipe directly before the carb just serves to give the air a
bit more distance to get its act together.
Ned
More information about the VirtualVairs
mailing list