<VV> ANFSCD: Valve Springs ?

UltraMonzaWest at aol.com UltraMonzaWest at aol.com
Sun Mar 26 22:18:57 EST 2006


In a message dated 3/26/2006 6:33:43 PM Pacific Standard Time, pp2 at 6007.us 
writes:

> Turned out the one that was tapping was a touch loose and stopped after 1/4 
> 
> turn but another 1/4 turn and the engine slowed down. Backed off to clack 
> and engine sped back up and then 1/4 fine, 1/2 engine slowed down again. 
> Wound up leaving at 1/4 turn from clack and all is quiet.
> 
------------------------------------------------------------------------------
---------

Wow!  you have forgot a lot!   Lifters will BLEED down in 45-90 seconds..

Hot running....adjust to "0"..then add 1/4 - 3/4 turn......engine should 
MISS!...but will smooth out in a minute...then go to next...

Why its easier to do it cold....

Matt Nall / Patiomatt / WCUH / Mr. DeckRug
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.
http://members.aol.com/patiomatt    Corvair Info!


More information about the VirtualVairs mailing list