<VV> oil pressure sender installation

[Bryan Blackwell]

For those of you who'd like to see Ned's install (it looks very clean), 
I've posted his photos on my web site:

http://autoxer.skiblack.com/oil-cooler.html

--Bryan

On Mar 20, 2006, at 11:05 PM, AeroNed at aol.com wrote:

> I have an electric sender mounted off a bracket that's attached to the 
> left
> head where the battery ground cable is connected. The oil line is 
> attached
> where  the stock OP switch goes. The reason I used this set up is 
> because I also
> have a  Vega OP switch for the dash light and electric fuel pump. 
> Getting the
> fitting  was real easy at my local hardware store. Having all of this 
> stuff
> crammed in  front of the alternator, on some awkward stalk looked like 
> trouble.
> I used a  couple of different metal lines to plumb my remote setup. I 
> had very
> messy  failures that I attributed to vibration. Good ole Smitty 
> suggested a
> plastic  line from a mechanical OP gauge. This setup works great.