<VV> Re: [fastvair] Rear Disc Brakes

[cjcavitt at comcast.net]

yes, that is the most common set-up for the front and the  rear of a late.it is quite a job if you have never done it before,on the lates you have to take apart the rear wheel bearing hubs to install a custom caliper bracket that yo will need to make.
you will need to make rear brake hard lines,you will need to have a custom lenght e-brake cable made,you need to machine the OD of the spindal to mount the rotor,theirs more but you get the idea,or you can just buy the kit already done from corvair underground  if you decide to do it yourself e-mail me and i will give you specific info on how to do it ,i have done alot of those.     
   
            curt



-------------- Original message -------------- 
From: "George Jones" <bubblehd at excite.com> 

> 
> I don't recall if it was on one of these lists, or somewhere on the web, but I 
> seem to recall that someone used mid '80s Caddy Seville brakes on the back of 
> their late model. I have an opportunity to pick up a complete set and was 
> wondering what was involved in adapting them to the 'vair? 
> 
> Any help would be appreciated. 
> 
> George Jones 
> 
> 
> 
> 
> _______________________________________________ 
> Join Excite! - http://www.excite.com 
> The most personalized portal on the Web! 
> 
> 
> 
> 
> This list is for racing/modifying our Corvairs,and to buy/sell parts. 
> homepage http://groups.yahoo.com/group/fastvair "sign in" at upper right of page 
> for archives, edit your membership(digest,unsubscribe) 
> Post message: fastvair at yahoogroups.com 
> 
> 
> Yahoo! Groups Links 
> 
> <*> To visit your group on the web, go to: 
> http://groups.yahoo.com/group/fastvair/ 
> 
> <*> To unsubscribe from this group, send an email to: 
> fastvair-unsubscribe at yahoogroups.com 
> 
> <*> Your use of Yahoo! Groups is subject to: 
> http://docs.yahoo.com/info/terms/ 
> 
> 
> 
>