<VV> Replacing Exhaust Stack

[Les]

Heat head (350 or so is no problem)  and cool stack (ice) twist out with pliers if it doesn't fall out. Replace removed stack with the new one out of the freezer. Tap into place; make sure the flat side is oriented towards the pushrod tube.

Les
corvair at mts.net
==============
Message: 4
Date: Sun, 04 Jun 2006 08:50:19 -0400
From: Jim Houston <tampatexan at tampabay.rr.com>
Subject: <VV> Replacing Exhause Stack
To: Virtual Vairs <virtualvairs at corvair.org>
Message-ID: <4482D70B.9010903 at tampabay.rr.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I have my replacement head at the local machine shop for inspection, 
etc.  The machinist is familiar with VWs and has done valve jobs on 
several local Corvairs, but he has never replaced an exhaust stack.  
What is the approved /accepted /preferred /best /easiest /suggested 
method of doing this??

Thanks in advance

Jim Houston
Brandon, FL