<VV> Rear seat bolts

[Frank DuVal]

The front seats are 5/16" bolts. The heads are 1/2" hex.

Is this a rear seat question?

Frank DuVal

TimogensTurbo at aol.com wrote:

>In a message dated 6/3/2006 6:56:25 PM Pacific Daylight Time, 
>scandish at sbcglobal.net writes:
>
>  
>
>>I'm installing the new interior in my '65 &do not have a Fisher body 
>>manual. Neither the GM assembly manual or the Chevy Corvair shop manual for the '65 
>>shows seat attachment diagrams. Are the 6 1/4x20x1" bolts w/ captured 
>>washers that held the old seat screwed directly into the pan,into bosses welded to 
>>the pan or are there nuts on the other side? Mine will screw in but pop 
>>out.TIA.
>>  
>>    
>>
>------------------------------------------------------------------------------
>-
>
>Captured nuts....and I believe 5/16"   not !/4"!
>
>Matt Nall
>stocker, mod, v8, turbo, boat, Sandcar
>ALLVAIR!
>Timogen was a softy!
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>
>  
>