<VV> Accelerator Cut in Carpet

[Cliff Tibbitts]

Jay, I would be interested to see what comes of this.  The accelerator is
easy.  If you are looking at the pedal as you would if you were in the seat,
there is a nut on the lower left corner that bolts the pedal to the pivot
rod.  Remove the nut and washer and just tap the accelerator off.  Hint,
measure the distance from the rod to the front panel so that you have a
reference when you put it back in.  If you already have carpet, just
duplicate what your existing carpet has, provided it looks nice.  

Good luck, 

Cliff Tibbitts
66 Monza

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of JRG478 at aol.com
Sent: Saturday, July 15, 2006 10:31 PM
To: virtualvairs at corvair.org
Subject: <VV> Accelerator Cut in Carpet

I am getting ready to install my new carpet in my 67 coupe; I have a couple

of questions.
 
1) How does the accelerator come off - nothing in the shop manuals that I  
can find. 
 
2) What kind of a cut do I have to make for it - How much of the shaft is  
actually on top of the carpet? 
 
Thanks, Jay - '67 Monza
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________