<VV> Re: Sound deadening
jwcorvair at aol.com
jwcorvair at aol.com
Fri Jan 6 09:08:26 EST 2006
Hmmm. Very interesting. Did you apply it to the firewall (rear bulkhead) and to the floors as well?
-----Original Message-----
From: wblanning at adelphia.net
To: virtualvairs at corvair.org
Sent: Fri, 6 Jan 2006 7:36:38 -0500
Subject: <VV> Re: Sound deadening
jwcorvair at aol.com writes:
<I was reading about sound deadening 912s on the 912 Registry Help Board. One of
the contributors suggested a product called "QuietCar." This product is a
brush-on sound deadener that is suppose to absorb sound better than Dynomat. >
Both myself and Russell Davis tried the Quiet Car sound proofing, however it did
not provide improvement for either of us. I sprayed it inside the cavity behind
the rear door panels of a LM coupe to include the inside of the outer fender and
the tops of the fender wheels, and also inside the frame rails around the engine
compartment. I took noise readings before and after application and there was
no improvement. Russell brushed it inside the engine compartment of a LM coupe.
He did not take noise readings but said he could not tell a difference.
This material might provide improvement if used in some other area, however
based on my experience I would not recommend it.
Wade Lanning
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list