<VV> Corvair Belt Wrench

[Ron]

I find that the 1/4" ratchet with a long extension is the best for those 
lower carb nuts.
RonH

----- Original Message ----- 
From: "Western Canada CORSA" <westerncanadacorsa at shaw.ca>
To: <VirtualVairs at corvair.org>
Sent: Friday, August 25, 2006 6:28 PM
Subject: RE: <VV> Corvair Belt Wrench


> I've got the Clark's wrench with the 9/16th and the 1/2" on the other end. 
> I agree with Ken, the 1/2" end works great getting at the lower nuts on 
> the carbs.
>
> Regards,
> Joel
>
> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org]On Behalf Of J R Read_HML
> Sent: Friday, August 25, 2006 5:14 PM
> To: kcvair at netscape.com
> Cc: VirtualVairs at corvair.org
> Subject: Re: <VV> Corvair Belt Wrench
>
>
> I think it is bent over for a possible clearance issue.
>
> Later, JR
>
>  ----- Original Message ----- 
>  From: kcvair at netscape.com
>  To: hmlinc at sbcglobal.net
>  Cc: VirtualVairs at corvair.org
>  Sent: Friday, August 25, 2006 7:10 PM
>  Subject: Re: <VV> Corvair Belt Wrench
>
>
>  The other end "1/2" inch is handy for loosening the lower side of 
> carburetors.  Maybe that is what it was designed for.  Ken Clark
>
>  --- hmlinc at sbcglobal.net wrote:
>
>  From: "J R Read_HML" <hmlinc at sbcglobal.net>
>  To: "VirtualVairs AA" <VirtualVairs at corvair.org>
>  Cc:
>  Subject: <VV> Corvair Belt Wrench
>  Date: Fri, 25 Aug 2006 15:52:19 -0500
>
>  One version..  I've seen various configurations of this "keep in the
>  vehicle" tool.
>
>  The end with two 90s is 9/16.  The other end is 1/2.
>
>  LINK:
>
> 
> http://pg.photos.yahoo.com/ph/hmlinc@sbcglobal.net/detail?.dir=/8f48re2&.dnm=21c0re2.jpg&.src=ph
>
>  Later, JR
>  Past, present and future posts to Virtual Vairs by this writer are for 
> the
>  private use of Virtual Vair members only.  Reproduction, including
>  archiving, outside of the Virtual Vairs is specifically prohibited.  This
>  prohibition includes any portions of this writer's message which may
>  have been included in a response message by another VV member.
>
>  _______________________________________________
>  This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property
>  of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
>  This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>  Post messages to: VirtualVairs at corvair.org
>  Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
>
>
>
> ------------------------------------------------------------------------------
>  Netscape.  Just the Net You Need.
>
>
> ------------------------------------------------------------------------------
>
>
>  No virus found in this incoming message.
>  Checked by AVG Free Edition.
>  Version: 7.1.405 / Virus Database: 268.11.6/427 - Release Date: 8/24/2006
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>